Programming The Stimulator Stimulation Settings - Axonics 2501 Manuel

Programming the Stimulator Stimulation Settings

48
To program the stimulation settings of the Stimulator, first:
1
Connect to the Stimulator (see manual section Connecting to
•
the Stimulator).
2
Navigate to the Programming screen from the Patient Device
•
screen by pressing "Programming" in the top right corner of
the Patient Device screen.
The Programming screen enables adjustment of the stimulation
parameters and delivery of test stimulation. Additional features
include the ability to capture programming session notes.
Select "Program 1" or "Program 2" at the top right of the screen
( 1 ) to pick which of the two stimulation programs to adjust
and set.