Select A Base; Using The Intercom Feature - Topcom BUTLER 5710 Manuel D'utilisateur

Additional handsets and base stations
9.3

Select a base

You can switch your handset between bases. You can also set it to automatically base select with
the strongest signal. The handset must first be registered with each base individually.
When you have activated Automatic base selection and the handset is out of range
on the current base, the handset will only search for the strongest base in standby
(not during communication).
9.4

Using the intercom feature

Calling an internal handset
4 5 6
g h i j k l m n o
Transfer an external call to another handset
During an external call:
4 5 6
g h i j k l m n o
Conference call
You can talk between 2 handsets and an external line at the same time.
During an external call:
4 5 6
g h i j k l m n o
17
1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Select Base" and confirm.
4 Select "Manual" or "Auto" and confirm.
If you have selected "Manual":
5 Select the base to be associated with the handset and confirm.
1 Press the left key INT.
The screen displays "Handset _".
2 Enter the internal number of the handset you want to call.
3 Press the on-hook key to hang up or put the handset back on the base.
1 Press the left key INT.
The screen displays "Handset _".
2 Enter the internal number of the handset you want to call.
Your external correspondent is placed on hold.
3 When the internal correspondent answers, press the on-hook key to
transfer the call.
OR
3 If the inthernal correspondent doesn't answer, press the left key INT to
retrieve the external correspondent or to go from one to the other.
4 Press the on-hook key to hang up or put the handset back on the base.
1 Press the left key INT.
The screen displays "Handset _".
2 Enter the internal number of the handset you want to call.
Your external correspondent is placed on hold.