Features; General Information; Gears - Siemens 1FK7 Serie Mode D'emploi

3.2

Features

3.2.1

General information

The technical data of the drive is stated on the type plate.
Dimensions can be taken from the dimensional sketches in the relevant planning guide
or the DP tool "CAD-Creator".
Comply with permissible torques, make a current limitation on the servo
frequency converter if necessary.
Transport temperature
Storage temperature
Ambient temperatures
Installation altitude
Weight
Degree of protection as per EN 60-529
Sound pressure level as per EN 60 034-9
Vibration severity grade as per EN 60 034-14 Grade N
True running, coaxiality, axial run-out devia-
tion as per IEC 60 072-1
The dimensional sheets of the DP tool "CAD-Creator" and the "Three-phase
servomotors" operating instructions contain additional technical values.
3.2.2

Gears

The corresponding gear size can be seen in the second item of the gear type (see
type plate, fig. 7) or the second item of the first block of the order option.
3.2.2.1 Worm gear
Lubricant
Oil filling quantity
Bleeding:
- gear size 0 (mounting positions 2 and 5)
- gear sizes 1 to 4
Transport lifting tackle
20
ENGLISH
-20 °C to +40 °C (-4 °F to 104 °F)
0 °C to +40 °C (32 °F to 104 °F)
-15 °C to +40 °C (5 °F to 104 °F)
otherwise the rated data are reduced
to 50 °C conversion factor 0,92
to 60 °C conversion factor 0,82
≤up to 1000 m a.s.l,
2000 m conversion factor 0,94
2500 m conversion factor 0,9
Refer to the type plate
IP 65
approx. 75 dB(A)
Tolerance N
NOTE
see rating plate
see rating plate
- valve open
- valve lockable
without
610.40 064.01 Siemens AG