Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8836363
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2.
Wear the appropriate type of full-face shield in addition to
safety googles, as the work can create chips, abrasive or
particulate matter.
3.
Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
4. Wear protective clothing designed for the work
environment and tool.
5.
Non-skid footwear is recommended to maintain footing
and balance in the work environment.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become
entangled with the moving parts of a tool. Keep long hair
covered or bound.
3.
Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for
a specific function. Do not modify or alter this tool or use it
for an unintended purpose.
4
40-TON HYDRAULIC SHOP PRESS
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
