PRO-POINT 8836363 Manuel D'utilisateur page 7

V1.0
2. Do not allow people, mobile equipment or vehicles to pass
over the unprotected air hose. Position the air hose away
from high traffic areas, in a reinforced conduit or place
planks on both sides of the air hose to create a protective
trench.
3. Prevent damage to the air hose by observing the following:
3.1 Keep the air hose behind the tool and out of the tool's
work path.
3.2 Keep the air hose away from heat, oil, sharp edges or
moving parts.
3.3 Do not wrap the air hose around the tool as sharp
edges may pierce or crack the air hose. Gently coil the
hose and either hang on a hook or fasten with a device
to keep hose together when storing.
4. A damaged or disconnected air hose under pressure may
whip around and inflict personal injury or damage the work
area. Secure the compressor's air hose to a fixed or
permanent structure with clamps or cable ties.
HYDRAULIC PRECAUTIONS
DANGER! Seek immediate medical attention if hydraulic fluid
under pressure penetrates your skin. See Injection Injury
precautions for instructions before using a pressurized
hydraulic system.
1. Do not touch or handle hydraulic hoses or components
while under pressure. Hydraulic fluid escaping under
pressure has sufficient force to penetrate your clothing and
skin. A pinpoint hole may inject hydraulic fluid into your
body. Seek immediate medical attention if this occurs (see
Injection Injury).
2. Never exceed the hydraulic system's load capacity (see
Specifications).
Visit www.princessauto.com for more information
40-TON HYDRAULIC SHOP PRESS 8836363
7