Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8798167
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2.
Wear gloves that provide protection based on the work materials
or to reduce the effects of tool vibration.
2.1 Do not wear gloves when operating a tool that can snag the
material and pull the hand into the tool.
3.
Wear protective clothing designed for the work environment
and tool.
4.
Non-skid footwear is recommended to maintain footing and
balance in the work environment.
5.
Wear steel toe footwear or steel toe caps to prevent a foot injury
from falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to
avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of
drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating the tool. Proper footing and
balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety rules.
If you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
4
3,500 LB 12V DC UTV WINCH
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
