Personal Protective Equipment; Personal Precautions - PRO-POINT 8327835 Manuel D'utilisateur

8327835

PERSONAL PROTECTIVE EQUIPMENT

1. Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2. Wear protective clothing designed for the work
environment and tool.
3. Non-skid footwear is recommended to maintain footing
and balance in the work environment.
4. Wear a NIOSH approved respirator when working on
materials that produce hazardous fumes, dust or
particulate matter.

PERSONAL PRECAUTIONS

Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2. Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for
a specific function. Do not modify or alter this tool or use it
for an unintended purpose.
2. Do not use the tool if any parts are damaged, broken or
misplaced. Repair or replace the parts.
3. Never point the heat gun towards a bystander, an animal,
yourself or a combustible material. The heat gun generates
4
DIGITAL CONTROL ELECTRIC HEAT GUN
For technical questions call 1-800-665-8685
V1.0