Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8836363
2.1 The maximum load is 40 tons. Never apply excessive
force to a workpiece and always use the pressure gauge
to accurately determine the applied load.
3.
Do not adjust the hydraulic system's relief setting. The
settings are pre-set by the factory.
4. Hydraulic oil under pressure is hot and can cause a burn
injury if touched, sprayed or spilled. Allow the hydraulic
system to cool before conducting maintenance.
5.
DO NOT use the press if any part is bent, broken, cracked,
leaking or otherwise damaged, or it has been subjected to
a shock load.
5.1. Hydraulic components require regular inspection.
Release all pressure from the system before you inspect
it. Replace damaged hydraulic parts with identical
manufacturer's components.
6.
Do not attempt makeshift repairs to a hydraulic system.
Such repairs can fail suddenly and create a hazardous
condition.
7.
A damaged or disconnected hydraulic hose under pressure
may whip around and inflict personal injury or damage the
work area. Secure the hose to a fixed or permanent
structure with clamps or cable ties.
8.
Hydraulic fluid has a combustible flash point of 200°F
(93°F). Do not expose the fluid to an ignition source.
9.
Change your clothing immediately if sprayed with hydraulic
fluid. Store clothing or rags contaminated with hydraulic
fluid in an approved metal safety can with a spring-closing
lid and venting designed to contain a fire.
10. Only use hydraulic fluid in the pump. Do not substitute or
mix brake fluid, or any other fluid, with the hydraulic fluid.
This can result in a pump failure and injure the user or
bystander. It may also damage the pump.
8
40-TON HYDRAULIC SHOP PRESS
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
