Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
2.
Do not use the tool if any parts are damaged, broken or
misplaced. Repair or replace the parts.
3.
The maximum load is 30 tons. Do not exceed this rated
capacity. Never apply excessive force to a workpiece and
always use the pressure gauge to accurately determine the
applied load.
4. Inspect the press before each use. Do not use if any
component is bent, broken, cracked, leaking or showing
other damage. Do not use the press after a shock load until
a qualified technician has examined the press.
5.
Check to ensure that all bolts and nuts are tight.
6.
Only use this shop press on a surface that is stable, level
and not slippery. The surface must be capable of sustaining
the weight of the shop press and the load.
7.
Ensure that the workpiece is center-loaded and secure. An
unbalanced load may slip off the heel blocks or bed frame.
8.
Keep hands and feet away from bed area at all times. Any
part of the body contacting the tool's working parts could
result in an injury.
9.
Do not use the shop press to compress a spring or any
other item that could disengage and cause a potential
hazard. Never stand directly in front of a loaded press and
never leave a loaded press unattended.
10. Do not allow an untrained person to operate the press.
11. Do not use brake fluid or other improper fluid in place of
hydraulic oil. Avoid mixing different types of oil when
adding hydraulic oil. Only good quality hydraulic jack oil
can be used.
12. Do not expose the press to rain, snow or inclement weather.
13. Bolt the press to the floor if it is to be used on bulky or
unstable items.
AIR TOOL PRECAUTIONS
1.
Use only clean and dry compressed air as a power source.
Contaminated or moist air will gradually damage the tool.
Visit www.princessauto.com for more information
40-TON HYDRAULIC SHOP PRESS
8836363
5
Publicité
Table des Matières
