7.0
USER PARAMETERS
Pressing the [Func/Set] key and holding for 2 seconds during normal operation allows the
user to access the parameters for customising the scale. The parameters are split into 2
groups:
1.
Scale
automatically).
2.
RS-232 parameters (can be accessed by selecting the 'rs 1' and 'rs 2' menu
options in the scale parameters menu).
7.1
SCALE PARAMETERS
Pressing the [Func/C] key and holding for 2 seconds during normal
operation allows the user to access the parameters.
Scroll through the list of functions using the ⭡ and ⭣ directional keys. Press
[Tare/↵] to enter a parameter.
Press [0/Esc] to exit the scale parameter section and return to normal
weighing.
This group of parameters is used to control the operation of the scale.
parameters
(pressing
the
[Func/Set]
key
will
access
this