Key Descriptions - Adam Equipment Gladiator GGS 8 Mode D'emploi

4.0

KEY DESCRIPTIONS

Sets the zero point for all subsequent weighing. The display shows zero.
[Tare/↵]
Tares the scale. Stores the weight currently on the scale as tare value, subtracts
the tare value from the gross weight and shows the results.
A secondary function,
Parameters.
CHK: Selects checkweighing. Used to set the Low/High weight limits while
[CHK/PRINT/⭡]
checkweighing.
PRINT: Sends the results to a PC or a Printer using the RS-232 interface. It also
adds the value to the accumulation memory if the accumulation function is not
automatic.
⭡: Up directional button for scrolling. Also used for incrementing the active digit
when setting a value for Parameters.
Selects the weighing unit to be displayed from those which are enabled. See
[Disp/Mode/⭢]
parameter S1 in section 7.4.
A secondary function, ⭢ is to move the active/flashing digit to the right when
setting values for Parameters.
Selects the Functions of the scale. If the scale is weighing, it will select parts
[Func/Set/⭣]
counting. If it is not in weighing mode, it will return the user to weighing.
A secondary function (SET) will bring up the settings menu. Also used to set
values used for parameters
[0/Esc] Used to zero the scale.
A secondary function (ESC) is to return to normal operation when the scale is in a
Parameter setting mode.
/ ST/ CE] To switch on and switch off the scale.
ST: Secondary function allows the user to store/ recall checkweighing limits.
is of "Enter" key used when setting up the value for the