Reversibility Of A Full Glass Door; Layout - Storage - Eurocave 5000 Série Mode D'emploi

4/ INSTALLING YOUR WINE CABINET
III. Reversibility of a full glass door
x3 x3 x3 x4
A B C D E
This allows you to change the direction in which the door opens. Follow
the instructions below (example for changing a right-hand door into a left-
hand door):
1
2
3
4
1
Unscrew the three screws using a "T25" Torx wrench.
2
Remove the upper hinge.
3
Carefully remove the caps using a thin blade.
4
Remove the cabinet door by opening it slightly, then lifting it upwards.
5
Unscrew the door pin.
6
Carefully remove the cap using a thin blade and assemble the pin in its
place. Reposition the cap on the opposite side
8
7
7
Unscrew the two screws and the door catch.
Unscrew the two screws on the opposite side and remove the two
12
washers.
GB
A
Upper hinge
B
Caps
C
Caps
F G H J D
Torx screw
E
Hex screw
x2
F
Door catch
G
Lower hinge
8
Mount the door catch on the desired opening side, using screws.
Replace the washers, then the screws, on the side opposite the door catch.
9
Turn the door through 180°.
Warning: the door is very heavy.
precautions to ensure that you do not injure yourself or drop it.
10
Put the door back on its pin.
13
11
11
Put in place the upper hinge.
12
Screw the hinge so that the door is completely parallel to the cabinet.
Check that the door seal adheres well to the cabinet (by closing the door),
to ensure that it is completely air-tight.
13
Put in place the caps.
H
Door pin
J
Door pin cap
15
14
14
As the door has turned 180 degrees, reposition your handle above
the lock: Unscrew the three screws placed on the side of the door,
using the Allen wrench (2,5 mm), which you will find in the handle's
box.
15
Remove the three caps.
Take any necessary
Your wine cabinet EuroCave has been designed to evolve. Depending on the model, it can be adapted to your requirements and be modified in
terms of storage.
Various storage methods
The layout of your wine cabinet can be modified according to your requirements.
Refer to pages 72 to 74 to look at arrangement examples.
12
How to use the storage shelf (Ref.AXLNH)
4/ INSTALLING YOUR WINE CABINET
16
Handle
Front
18
Lock
16
Position the handle on the specially designed groove on the door
frame. Insert the handle all the way into the groove using a forward
movement.
17
Screw the three screws back on. Take care not to catch the seal
when screwing.
18
Replace the three caps.
5/ LAYOUT – STORAGE
Universal storage Universal sliding
shelf shelf, fitted with the
Ref.: AXLNH "Main du sommelier"
Ref.: ACMSC
Capacity: 50 bottles Capacity: 8 bottles
Max. weight: 85 kg
To store bottles of Bordeaux:
Turn each metal rod so that it is in contact with
the wall of the cabinet. Storage for 4 rows at the
front and 5 rows at the back, or 50 bottles*.
* Each shelf is fitted with a label holder.
Côté face
Cadre de porte
avant
View from above
17
Lock
Optional articulated
presentation for
ACMSC shelves
Ref.: AOPRES
Capacity: 9 bottles
with 5 inclined
To store bottles of Burgundy:
Remove themetal rods.
Storage on 7 levels, 8 bottles on each level, or
56 bottles*
13
GB