The Front Panel; The Top Panel; Figure 3-2: The Router's Front Panel; Figure 3-3: The Router's Top Panel - Cisco Systems Linksys WRT150N Mode D'emploi

Wireless-N Home Router

The Front Panel

The Router's LEDs are located on the front panel.
POWER Green. The POWER LED lights up and will stay on while the Router is powered on.
ETHERNET 1, 2, 3, 4 Green. These numbered LEDs, corresponding with the numbered ports on the Router's
back panel, serve two purposes. The LED lights up when the Router is connected to a
device through the corresponding port. If the LED is flashing, the Router is sending or
receiving data over that port.
INTERNET Green. The INTERNET LED lights up when there is a connection through the Internet port.
WIRELESS Green. The WIRELESS LED lights up when there is a wireless connection. If the LED is
flashing, the Router is sending or receiving data over the wireless network.
SECURITY Green. The SECURITY LED indicates when wireless security is enabled.

The Top Panel

The Router has a button reserved for a future function.
Chapter 3: Getting to Know the Wireless-N Home Router
The Front Panel

Figure 3-2: The Router's Front Panel

Figure 3-3: The Router's Top Panel

Button
7