Technical Specifications - Comunello Automation CU - 24V - HP Instructions D'utilisation Et D'installation

Masquer les pouces Voir aussi pour CU - 24V - HP:
Table des Matières

Publicité

2 WIRES CONNECTION TABLE:
TAB.01
DESCRIPTION
1
Power supply
6A
Motor power supply
2
Flashing light
4A, 5A
TX photocell
4B, 5B
RX photocell
6
Key selector
6B
Limit switches
6C
Encoder
3
Antenna
The table refers to the example of wiring shown in the ABACUS model manual for swing motors.
If the cables are of a different length than those shown in the table, the section of the cables must be determined based on the actual absorption of the connected
devices.
The requirements are reported in the EN 50575: 2014 standard:
With the publication of the standard EN 50575, in the list of harmonized standards for Regulation CPR 305/2011, Com. 2016 / C 209/03, also electric cables,
already subject to CE marking for the Low Voltage Directive 2014/35 / EU, must be CE marked also under the CPR Regulation.
In the eventualities of connections with devices connected in parallel on the same power supply line, the sizing of the cables shown in Table 1 must be re-evaluated
on the basis of the absorptions and the actual distances.

3 TECHNICAL SPECIFICATIONS

Back-up Battery input:
Flashing light output:
Motors outputs:
Electric lock output:
Photocells power supply:
Indicator light output:
Working temperature:
Radio receiver:
Transmitters:
Max TX codes stored in memory:
Board dimensions:
Fuse 1 :
Fuse 2:
26
COMUNELLO ®Copyright 2019 - All rights reserved
CABLE
LENGTH from 1m to 20m
2 x 1.5 mm
2 x 2.5 mm
EN standard 50575,
2 x 0.5 mm
in the list of harmo-
2 x 0.5 mm
nized rules for the
Regulation CPR
4 x 0.5 mm
305/2011, Com.
3 x 0.5 mm
2016/C 209/03
3 x 0.5 mm
3 x 0.5 mm
RG58
24 V 7A/h max.
24 V
25 W max.
24 V
2 x 50 W max.
24 V 12W max.
24 V 5 W max.
24 V 4 W max.
- 20 ÷ 55 °C
433 Mhz
18 Bit o Rolling Code
120(CODE o CODE PED/2°CH)
160 x 107 mm.
T 15 A 250V (Delayed fuse)
T 1.6 A 250V (Delayed fuse)
LENGHT from 20m to 50m
2
2 x 2.5 mm
2
2 x 4.0 mm
2
2 x 1.0 mm
2
2 x 1.0 mm
2
4 x 1.0 mm
2
3 x 1.0 mm
2
3 x 1.0 mm
2
3 x 1.0 mm
Max. 20m
2
2
2
2
2
2
2
2

Publicité

Table des Matières
loading

Table des Matières