Télécharger Imprimer la page

nVent RAYCHEM C25-100-METAL Mode D'emploi page 3

Publicité

C25-100-METAL C3/4-100-METAL
ENGLISH
Baseefa16ATEX0039U
IECEx BAS 16.0042U
Installation instruction for connection kits nVent RAYCHEM
C25-100-METAL and C3/4-100-METAL. For use with all
nVent RAYCHEM BTV-, QTVR-, XTV-, KTV-, HTV-, VPL- and FHP-
heating cables.
Before installing this product, read the installation instructions
completely.
Schedule of Limitations:
The service temperature of the C25-100-METAL / C3/4-100-
METAL connection kit is –60°C to +180°C. When the C25-100-
METAL / C3/4-100-METAL connection kit is used, it shall be
mounted to an enclosure in accordance with the manufacturer's
instructions.
The installer is to carry out a dielectric strength test on the Ex
equipment in which the C25-100-METAL / C3/4-100-METAL
connection kit is fitted. No dielectric breakdown shall occur.
(Alternatively an insulation resistance test may be undertaken
in accordance with EN 60079-30-2). The integral C1 core sealer
shall be installed inside an Ex equipment certified enclosure.
CAUTION: Prolonged or repeated contact with the sealant
in the core sealer may cause skin irritation. Wash hands
thoroughly. Overheating or burning the sealant will produce
fumes that may cause polymer fume fever. Avoid contamination
of cigarettes or tobacco. Consult MSDS VEN 0033 for further
information.
WARNING: To prevent electrical shock, short circuit or
arcing, this product must be installed correctly and water
ingress must be avoided before and during the installation.
Persons involved in the installation and testing of electric
heat tracing systems shall be suitably trained in all special
techniques required. Installation shall be carried out under the
supervision of a qualified person
The purchaser should make the manufacturer aware of any
external effects or aggressive substances that the equipment
may be exposed to.
The cable glands shall only be used for fixed installations.
The cables must be fixed to prevent pulling or twisting.
ТС RU C-BE.МЮ62.В.00054/18
Ex e IIC Gb U Ex tb IIIC Db U
Ta –60°C...+180°C IP68
ООО "ТехИмпорт"
II 2 G Ex eb IIC Gb or Ex db IIC Gb
II 2 D Ex tb IIIC Db
nVent.com/RAYCHEM | 3

Publicité

loading

Ce manuel est également adapté pour:

C3/4-100-metal