Bushnell Trophy Cam HD Notice D'utilisation page 26

Parameter
Field Scan
Coordinate
Input
26
Settings
(Bold=default)
ON, OFF
(After On is
selected): "A" Start/
Stop, "B" Start/
Stop, Interval
ON, OFF
See "Using the
Setup Menu Input
Screens"
Description
Turns Field Scan (Time Lapse)
recording mode on/off. When acti-
vated, Field Scan forces the camera
to take photos or videos even when
it is not triggered by a nearby live
animal, useful for constant monitoring
of an area that might be far away
from the camera. The user can set
the start and stop times for up to two
independent "blocks" of Field Scan
recording, as well as the interval time
between each photo/video. To ensure
correct operation, avoid setting
overlapping start/stop times for Field
Scan A and B. Please read the "Field
Scan 2x..." section of this manual for
details on using this feature (pg.18).
NOTE: If the "Camera Mode"
parameter is set to "Day" or "Night"
operation only, that will take priority
over your Field Scan settings. Set
Camera Mode to "24HR" if you are
setting day and night Field Scan start
and/or stop times.
Allows the user to input latitude
and longitude coordinates for the
camera's location. This data will
be embedded in the files saved on
the camera's SD card (if "On" is
selected). This makes it possible
to see each camera's location as a
"pushpin" on Google Earth maps
when reviewing a folder full of pho-
tos from multiple cameras, or use
other "geotag" capable software
(Picassa, etc). See pg. 31