Bushnell Trophy Cam HD Notice D'utilisation page 38

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

reading the SD card. If this happens, please format the SD card with
the WIRELESS Trophy Cam HD or in your computer first and then
insert the card into your WIRELESS Trophy Cam HD and try again.
• The default file system format of the WIRELESS Trophy Cam HD
is FAT16, which most computers can read. If you format an SD card
for the WIRELESS Trophy Cam HD in your computer, you should
choose the file system format FAT16. Normally FAT16 is recommended
unless you have another image viewer that uses FAT12 or FAT32
format.
Deleting Photos or Videos
If you see a photo or video during playback on the LCD or video monitor
that you want to delete, it can be done easily without leaving SETUP mode:
• Press the MENU key. You will see the first "Delete" screen, which lets
you selects the option to delete only the currently displayed photo/
video, or all photos/videos (see below).
• Highlight the "Delete Current" or "Delete All" option, then press OK.
• Next, select "Yes" and press OK to erase only the last displayed photo
or video (if you selected "Delete Current"), or every photo and video file
on the card (if you selected "Delete All")-or select "No" and press OK
to cancel the operation without deleting any files.
NOTE: after deleting a picture or a video file, the deleted files can't be restored!
It is also possible to delete all files from the card by using the Format parameter
(see pg. 25).
38

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

119598

Table des Matières