Bushnell Trophy Cam HD Notice D'utilisation page 34

MOUNTING and POSITIONING the WIRELESS
Trophy Cam HD
Mounting
After you've set up the camera's parameters to your personal preferences
at home or in your truck, you're ready to take it outside and slide the power
switch to "ON". When setting up the WIRELESS Trophy Cam HD for
scouting game or other outdoor applications, you must be sure to mount it
in place correctly and securely. We recommend mounting the WIRELESS
Trophy Cam HD on a sturdy tree with a diameter of about 6 in. (15cm). To
get the optimal picture quality, the tree should be about 16-17 ft. (5 meters)
away from the place to be monitored, with the camera placed at a height
of 5-6.5 ft. (1.5~2 m). Also, keep in mind that you will get the best results
at night when the subject is within the ideal flash range, no farther than 60'
(19m) and no closer than 10' (3m) from the camera.
There are two ways to mount the WIRELESS Trophy Cam HD: using the
provided adjustable web belt, or the tripod socket.
• Using the adjustable web belt: Fig. 5 illustrates using the web belt on
the WIRELESS Trophy Cam HD. Push one end of the belt through
the two brackets on the back of the WIRELESS Trophy Cam HD.
Thread the end of the strap through the buckle. Fasten the belt securely
around the tree trunk by pulling the end of the strap firmly so there is no
slack left.Note: it is not possible to use a cable lock (in the upper part
of the bracket) and the web belt at the same time.
• Using the tripod socket: The camera is equipped with a socket at
the bottom end to enable mounting on a tripod or other mounting
accessories with a standard1/4-20 thread.
Belt
Channel
34
Fig. 5: Attaching the Belt
Strap Buckle