Bushnell Trophy Cam HD Notice D'utilisation page 30

Send Setting > Daily Number
Select "Daily Number" then enter the maximum number of messages you
receive per day, from 1 up to 999.
The table on the next two pages lists the various text messages which you
can send to your camera, a short description of the result when it's received
(action or change to the setting of a Setup menu parameter), and the
confirmation response/display from the camera. Note: if a command is not
entered correctly, the camera will respond with "Invalid command !"
WAKE / ECO MODE OPERATION
Your 2G Wireless Trophy Cam HD operates by default in "ECO" mode,
to ensure the longest possible battery life. However, the use of "WAKE"
mode is required if you want the camera to "listen" for your remote (SMS
text) commands constantly-for example, #PIC# and other commands that
require an immediate action. In ECO mode, the camera can only check for
and respond to new commands when it connects to the network (per Send
Interval when triggered, and once per day).
Both WAKE and ECO can be selected/changed via SMS text commands
from your smartphone. See page 31-32 for specific details.
If the camera is in ECO mode and you send the WAKE message, the camera
will respond at the next network connection opportunity (trigger or daily
check-in) and switch to WAKE mode. If the camera is in WAKE mode and
you send the ECO message, the camera will respond to the command at
once and switch to ECO mode.
When the camera's power is first switched on (manually), it is in the default
ECO mode. If WAKE mode was previously selected remotely, and the
camera power is manually switched off then back on, WAKE mode operation
will resume after the first trigger.
30