Displaying The Temperature Trend (Outdoor); Displaying The Indoor Temperature; Displaying Temperatures In °C / °F; Displaying The Air Humidity (Indoor) - Auriol Z31092 Instructions D'utilisation Et Consignes De Sécurité

Displaying the temperature
trend (outdoor)
After successfully connecting with the outdoor
sensor, the weather station can display the
Temperature trend
21
You may see the following displays:
= The outdoor temperature is rising.
= The outdoor temperature is remaining
constant.
= The outdoor temperature is falling.
Displaying the indoor
temperature
The current Indoor temperature
the LC display.
Displaying temperatures
in °C / °F
Note: °C is the legally required temperature unit.
Note: The weather station is supplied in the
default setting of °Celsius.
Press the "+" / °C / °F button
between the Celsius and Fahrenheit tempera-
ture scales.
Displaying the air humidity
(indoor)
The current air humidity
display. The Comfort indicator
air humidity in three categories.
The following categories are available:
"Dry" = Air humidity
"Comfort" = Air humidity
indoor temperature
24 °C–27.9 °C
"Wet" = Air humidity
Displaying the maximum /
minimum temperature /
humidity
The minimum / maximum temperature / humidity is
measured for the first time after the batteries have
been inserted and stored in the weather station.
Press the "–" / MAX / MIN button
The maximum indoor
perature measured and the maximum
24
humidity measured are shown.
5
94604_aur_Funk-Wetterstation_content_GB_FI_DK.indd 11
.
is shown in
3
to switch
28
is shown in the LC
5
displays the
4
< 45 %
5
45–75 %,
5
3
> 75 %
5
briefly.
29
and outdoor tem-
3
Press the "–" / MAX / MIN button
briefly. The minimum indoor
temperature measured and the minimum
24
humidity measured are shown.
5
Press the "–" / MAX / MIN button
briefly to return to the current values.
Note: If no button is pressed within 5 seconds,
the displays automatically return to the
standard display.
Hold the "–" / MAX / MIN button
for approx. 3 seconds in order to delete the
stored maximum and minimum values when
you hear a beep sound. The values measured
from the time of deletion of the old values
until the next time the memory is called up
can be called up again.

Backlight

Press the SNOOZE / LIGHT button
backlight illuminates for 3 seconds.

Battery state display

The Battery state indicator
weather station's LC display if the batteries are
weak.

Replacing the batteries

Weather station:
Remove the battery compartment cover on
the back of the weather station.
Remove the used batteries.
Insert 3 new batteries type AA 1.5 V
(Mignon, LR06).
Note: Make sure you fit the batteries the
right way round (polarity). The correct polarity
is shown inside the battery compartment
Close the battery compartment
Press the RESET button
light up briefly.
Outdoor sensor:
Remove the battery compartment cover from
the back of the outdoor sensor.
Insert 2 new batteries of type AAA 1.5 V
(Micro, LR03).
Note: Ensure the correct polarity. This is
shown in the battery compartment
Close the battery compartment cover.

Troubleshooting

Note: This appliance has delicate electronic
components. This means that if it is placed near
an object that transmits radio signals, it could
cause interference.
again
29
and outdoor
3
again
29
down
29
. The
12
appears in the
23
.
34
.
34
. All the symbols
33
.
40
GB/IE 11
28.08.13 13:16