salmson SIRIUX Série Manuel D'installation Et Mise En Service page 85

LC display
• Options menu: setting of Heating (HV) / cooling air-conditioning (AC)
operating mode and conversion from SI to US units.
LC display
Installation and operating instructions Siriux/Siriux-D
Setting
Configuration of the IF-Modules
This setting is for configuring the IF Modules
(e.g. baud rate, bit format)
A, C,E and F are free parameters
The layout of the menu and of individual parame-
ters depends on the respective IF Module.
See the installation and operating instructions for
the IF Modules.
Turn the control button to adjust values.
The setting is applied
The display returns to the basic setting
Setting
Setting of operating mode
heating (HV) / cooling air-conditioning (AC)
In the basic setting (menu level 1), press
the control button for > 6 s.
Within these 6 seconds, menu level 2 appears after
approx. 1 s (menu item
ting).
.
, display position set-
English
79