Chilling And Storage; Starting / Cancelling Programs - Gram BAKER GA 500 Mode D'emploi

Example:

Chilling and storage

A program comprising rapid freezing followed by storage is required.
–
 Press
+
or
 When the required program is displayed, press P once.
 The green chilling lamp lights up. "ChiL" and the temperature setting are shown in turn in
the display.
–
 Press
+
or
–
 Press
+
or
 When the required program is displayed, press P once.
 The green chilling lamp lights up. "ChiL" and the temperature setting are shown in turn in
the display.
–
 Press
+
or
 Again, press P once.
 "ChiL" and the chilling time are now shown in turn in the display.
–
 Press
+
or
 Again, press P once.
 The display now shows the text "Stor" and the storage temperature setting in turn.
–
 Press
+
or
 Press P repeatedly until the first green lamp lights up again.
 Press S until "Strt" is shown in the display and then release it.
 Stop the program again by pressing P for 3 seconds

Starting / cancelling programs

Starting a program:
Program ChiL – Stor (chilling followed by storage):
Push for a second, while the temperature or time setpoint for ChiL is displayed. The
S
chilling process is started, and it then continues in infinite storage.
Program Stor (manual storage):
Push for a second, while the temperature setpoint for Stor is displayed. The storage
S
process is started.
Program rEtA (manual retarding):
Push for a second, while the temperature, humidity or time setpoint for rEtA is displayed.
S
The retarding process starts.
Program Pro (manual proving):
Push for a second, while the temperature, humidity or time setpoint for Pro is displayed.
S
The proving process starts.
765041584
. The display shows Pr1, Pr2, Pr3, Pr4 and Pr5 in turn.
until the required chilling temperature is shown in the display.
. The display shows Pr1, Pr2, Pr3, Pr4 and Pr5 in turn.
until the required chilling temperature is shown in the display.
to set the required chilling time.
to set the required storage temperature.
Rev 000
47