Setting The Cutting Height; Operation; Starting And Stopping The Engine - Grizzly BRM 56-196 A-OHV E-Start Traduction De La Notice D'utilisation Originale

- Remove spilt petrol;
- Keep petrol away from sparks, open
flames and other ignition sources;
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates
1. Unscrew the filler cap (
pour in the petrol to the lower edge of
the filler.
Do not fill the tank entirely, to allow
the petrol room to expand.
2. Wipe away petrol residues around the
filler cap and close the filler cap.

Setting the Cutting Height

The equipment has 6 positions for setting
the cutting heigh (25-75 mm):
1. Pull the lever (18) outwards and
push it to the desired position .
2. Push the lever back in.
The correct cutting height is around
25 – 45 mm for an ornamental lawn and
around 40 – 65 mm for a utility lawn.
Select a greater cutting height for
the first cut of the season.

Operation

Starting and Stopping the
Engine
8) and
The rechargeable battery (25) of the
electric motor (32) recharges while you
are mowing. If this is not enough because
you have repeatedly mown small areas,
please start with the starter handle
(
Observe noise control and local
regulations.
Warning! Petrol is flammable.
Start the engine at least 3 m
away from the filling location.
Start the equipment on a sturdy,
level base, if possible not in long
grass. Ensure that the cutting tool
is touching neither objects nor the
ground.
Regularly check petrol and oil level
(see „Initial Operation") and refill in
due time.
Start the motor (electric
start):
1. Press the primer three times
(red button)
2. Pull the safety loop (3) towards
the grip handle (1) and hold it.
3. Turn the key of the electric star-
ter (27)..
The motor starts
22):
Start the engine (manually):
1. Pull the safety catch (
wards the handle bar and hold it.
2. Pull the starter cord (
UK
3) to-
22).
85