Safety Instructions; Symbols / Instructions On The Implement; Symbols In The Manual; General Notes On Safety - Grizzly ERV 1201-31 ZV Set Traduction De La Notice D'utilisation Originale

Safety instructions

This section covers the basic safety in-
structions when working with this imple-
ment.
Symbols / Instructions on the
implement
WARNING!
These Instructions must be read!
Danger of injury due to fl ung-out
material! Keep bystanders well
away from the implement..
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept well
away from the implement
and its cutting tools!
CAUTION – Sharp tools: Ensure
that the hands and feet are kept
well away from the cutting tools.
The cutting cylinder continues to
rotate briefl y after the motor has
been switched off !
Always disconnect the plug from
the mains prior to maintenance
work or if the power cable is
damaged!
Caution with steps! Turn off
the power when the imple-
ment is to be carried across
steps!
102 Noise level ratings L
Protection Class II
in dB(A).
WA
Electrically powered implements
must not be disposed of with the
domestic waste.
Working width
Read the Operating Instructions
before setting up for work.

Symbols in the manual

Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage..
Help symbols with information on
improving tool handling.

General notes on safety

This implement can cause
serious injuries if it is not
properly used. Please read
these Operating Instructions
carefully and familiarize
yourself with all the control
elements before operating
this implement. Keep these
Operating Instructions in a
readily accessible place so
that this information is al-
ways at your disposal.
GB
49