Symbols In The Manual; Safety Instructions - Grizzly BRM 4210-20 Traduction De La Notice D'utilisation Originale

GB
Symbols on the filler cap:
Note on the petrol filler
Do not fuel any E85-mixtures.
Symbols on the oil filler cap:
Note on the oil filler
Symbols on the Tank:
Attention!
Read the instruction manual.
Caution – petrol is flammable!
Allow the engine to cool for at least
2 min. before refuelling.
Caution – toxic CO fumes! Do not
operate the equipment in enclosed
areas.
Caution – hot surfaces!
Risk of burning.
Symbol on petrol pump:
Press petrol pump (primer) 3x be-
fore the start.
Symbol on grip handle:
RUN
3x
STOP
86
Caution! Before start-
ing, check the oil
level.
Information
on starting
and stopping
the motor
START
I ON
Switch device on (ON):
Pull up safety loop.
0 OFF
Switch device off (OFF):
Release safety loop.

Symbols in the manual

Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.

Safety Instructions

This section deals with the basic safety
procedures when working with the equip-
ment.
WARNING! Read all of the safety
instructions and directions. Failure
to observe the safety instructions
and directions may result in electric
shock, fire and/or serious injury.
Instructions:
• Read the operating instructions care-
fully. Familiarise yourself with the
controls and with the correct use of the
equipment.
• In case of uncertainties, allow yourself
to be given instruction concerning the
use of the device and prohibited op-
erations.
• Pay attention, be aware of what you
are doing and take the utmost care