Cleaning And Maintenance; Cleaning And General Maintenance Work; Cleaning/Replacing The Air Filter - Grizzly BRM 42 B&S Traduction De La Notice D'utilisation Originale

GB

Cleaning and Maintenance

Have any repair and mainte-
nance work not described in
these instructions carried out by
a specialist workshop. Use only
original Grizzly replacement
parts. Risk of accidents!
Carry out maintenance and
cleaning work strictly with the
engine switched off and spark
plug connectors removed. Risk
of injury!
Allow the equipment to cool
before any maintenance and
cleaning work. Elements of the
engine are hot. Risk of burning!
Wear gloves when handling the
blade.
For cleaning and maintenance
work, also observe the Briggs &
Stratton instruction manual sup-
plied.
We recommend contacting an au-
thorised Briggs & Stratton dealer for
maintenance work on the engine.
You can fi nd a dealer near you
here:
https://www.briggsandstratton.com/
na/en_us/support/dealer-locator.html.
Cleaning and General
Maintenance Work
Tilt the device back for cleaning
and maintenance jobs at the bot-
tom side so that the spark plug
faces upwards.
Make sure that a second person
holds the device because there is
a danger of tipping backwards.
92
Do not tilt the equipment sideways
or forwards. Operating fl uids could
leak out and the engine could be
damaged.
• Always keep the equipment clean. To
clean, use a toothbrush or cloth but no
corrosive cleaning agents or solvents.
Do not use water to clean the engine as
it could contaminate the fuel system.
• To clean the blade housing, it is possi-
ble to connection a hose to the upper
side of the housing (
32).
• After mowing, remove plant remains
that are stuck to the equipment by us-
ing a piece of wood or plastic. Clean
the vent holes (
and blade area especially. Do not use
hard or pointed objects, which could
damage the equipment.
• Oil the wheels from time to time.
• Before each use, check the lawnmow-
er for obvious defects such as loose,
worn or damaged parts. Check that
all nuts bolts and screws are sitting
fi rmly.
• Check covers and guards (
14, 22) for damage and that they are
sitting correctly. Replace if necessary.
Cleaning/Replacing the Air
Filter
Do not operate the equipment
without the air fi lter otherwise dust
and dirt will get into the engine and
result in damage to the machine.
1. Remove the spark plugs con-
nector (
the Spark Plug").
2. Open the air fi lter box (9) and
take out the air fi lter (10).
16) (see
11), ejection hole
2, 11,
12) (see "Maintaining