Items Supplied And Device Overview; Device Functions - Cleanmaxx SG 5008S-5 Mode D'emploi

Items Supplied and Device Overview

17
1 Mains cable
2 Kink protection
3 Base
4 Operating lamp
5 Temperature control
6 Water reservoir
7 MAX marking
8 Bottom of iron
9 Spray nozzle
10 Water reservoir cover

Device Functions

• The device features electronic temperature setting, which reliably sets and
maintains the chosen temperature. With the temperature control (5) you can choose
the temperature you want from MIN to MAX (see the "Ironing Recommendations"
chapter).
• With the steam quantity control (11) you can choose the quantity of steam emitted
during ironing (but not while pressing the
steam is produced; on level 3 the largest amount of steam is emitted. Move the clip
on the control to the level you want.
• The device has an automatic switch-on function and an automatic safety switch-
off function. Both work with the device in both the horizontal and vertical position:
1. When you plug the mains plug into the plug socket, the operating lamp (4) lights
up. The device begins to heat up, and the temperature control lamp (15) lights
up. As soon as the set temperature is reached, this goes out. You can now iron.
19
13
12
11
10
9
8 7
11 Steam quantity control: setting of the
12 Self Clean button
13
14
15 Temperature control lamp (lights up as
16 Handle with touch sensor
17 Measuring cup
16
15
14
6
quantity of steam from 0 (no steam)
to 3
Spray button
Steam burst button
device heats up)
steam burst button (14)). On level 0 no
EN
1
2
3
4
5