Luminance Brands KATHY IRELAND HOME LURAY ECO CF860BQ00 Mode D'emploi page 29

17. Light Kit LED Driver Replacement
17.5
NOTE: You may need help of an assistant to hold
the ceiling cover, coupler cover and upper motor
cover up and away from the motor housing, while
performing the following steps.
Slide the Motor Coupler Cover up the Downrod to
access the top of the Motor Housing (Figure 43).
17.6
Remove the Hairpin Clip from the Clevis Pin. Remove
the Clevis Pin from the Downrod (Figure 44).
Retain both the Clevis Pin and the Hairpin Clip for future
reinstallation.
Remove the Two Set Screws, using a Phillips Head
Screwdriver, from the Downrod (Figure 44).
Retain both Set Screws for future reinstallation.
17.7
Remove the Three Upper Motor Cover Screws, using a
Phillips Head Screwdriver (Figure 45).
Retain the Three Screws for future reinstallation.
Slide the Upper Motor Cover up to expose access to the
Light Kit Driver.
Figure 43
4.5" DOWNROD
CLEVIS
PIN
REMOVE
PHILLIPS HEAD
SETSCREWS (2)
Figure 44
UPPER MOTOR
COVER
Figure 45
29
(Continued)
COUPLER
COVER
UPPER MOTOR
COVER
MOTOR
COUPLING
HAIRPIN
CLIP
UPPER MOTOR
COVER SCREWS (3)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF860