Luminance Brands KATHY IRELAND HOME LURAY ECO CF860BQ00 Mode D'emploi page 6

3. Ceiling Fan Assembly
3.3
Remove One of the Three Pan Head Screws from the
Motor Assembly Hub, retain the Screw for future use.
Loosen the remaining Two Screws (Figure 3).
Place the 2-pin Motor Assembly connector through the
large Center Hole of the Light Kit Adapter (Figure 3).
Position the Light Kit Adapter Key Hole Slots onto the
Two loosened Screw Heads. Rotate the Switch Housing
Adapter clockwise to engage the Two Screws. Verify
that the Serrated Washers are not trapped between
the Light Kit Adapter and the Motor Hub. Reinstall the
previously removed Screw.
Retighten all Three Screws to securely attach the Light
Kit Adapter to the Motor Assembly.
A spare #6-32 x .375" Pan Head Screw is in the parts
bag, if needed.
3.4
Grasp the Motor by the Light Kit Adapter and Upper
Motor Cover, and carefully turn the partially assembled
Ceiling Fan over and place directly on top of the foam
pad such that the Light Kit Adapter is supporting the
weight of the Fan. The Blades should be free to rotate.
(Figure 4).
(Continued)
ROTATE CLOCKWISE
Figure 3
UPPER MOTOR
COVER
Figure 4
6
LIGHT KIT ADAPTER
PAN HEAD SCREW
MOTOR ASSEMBLY
HUB
PARTIALLY
ASSEMBLED
FAN
LIGHT KIT
ADAPTER
ETL Model No.: CF860