Luminance Brands KATHY IRELAND HOME LURAY ECO CF860BQ00 Mode D'emploi page 14

6. Optional Installation No-Light Plate Assembly
6.3
Disengage the Fan Motor Assembly 2-Pin Wire
Connector from the 2-Pin Wire Connector of the Light
Kit Assembly (Figure 23).
Store Light Kit Assembly in a safe location for future
installation.
Reinstall the #6-32 x .375" Pan Head Screw into the
Light Kit Adapter.
Securely tighten the Three #6-32 x .375" Pan Head
Screws.
A spare Light Kit Assembly #6-32 x .375" Pan Head
Screw is in the parts bag, if needed.
6.4
Carefully tuck all the Wires and Connector into the Light
Kit Adapter.
Place the No-Light Plate into the opening of the Light Kit
Adapter, aligning the Three Flat Areas on the top edge
of the No-Light Plate with the Three Raised Dimples on
the Light Kit Adapter and turn the Plate clockwise until it
stops (Figure 24).
NOTE: The no-light plate is equipped with an
interference device that will not allow it to be
installed if the light kit assembly is not removed.
NOTE: Periodically check that the no-light plate is
seated fully clockwise in Light Kit Adapter.
(Continued)
REINSTALL LIGHT
KIT ADAPTER PAN
HEAD SCREW
FAN MOTOR ASSEMBLY
2-PIN CONNECTOR
LIGHT KIT ASSEMBLY
2-PIN CONNECTOR
Figure 23
Figure 24
14
NO-LIGHT PLATE
INTERFERENCE DEVICE
FLAT AREA OF NO-LIGHT
PLATE (3)
ROTATE CLOCKWISE
LIGHT KIT
ADAPTER
RAISED
DIMPLES (3)
NO-LIGHT PLATE
ETL Model No.: CF860