Publicité
Please see the main GRAUPNER FS catalogue for details of suitable battery
chargers.
Electric power system and accessories
1
COMPACT 480 12 V
1
GENIUS 70 speed controller
1
LiPo flight battery
1
GRAUPNER G-SONIC
cells
1
GRAUPNER G-SONIC
cells
1
Propeller coupling
1
Propeller spacer
1
Motor mount
1
Spinner
1
Velcro cable tie
The model is extremely highly pre-fabricated, and is built to a superb standard of
quality. The kit includes a GRP cowl as standard. Please check first that the covering
film is stuck down all round, and run a film iron along the seams if you are not sure.
This applies in particular to hinge slots and film overlaps. We recommend that you
apply clear adhesive tape over the faces into which the control surface hinges are to
be fitted, because moisture tends to creep under the film at such areas, causing it to
lift.
Materials and tools required
Twist drill, 1.5 mm Ø
Twist drill, 1.7 mm Ø
Twist drill, 2.0 mm Ø
Screwdriver, cross-point / slot-head
Allen-tip screwdriver
Flat-nose pliers
Adhesives
White glue, e.g. UHU coll, Order No. 958.60
UHU hart, e.g. Order No. 534
Low-viscosity cyano-acrylate ("thin cyano"), e.g. Order No. 5822
Assembling the BO 209 MONSUN
Don't start building the model until you have examined the components and studied
the individual stages of construction, so that you have a clear understanding how it
goes together. If you are not satisfied with any component, take it back to your
supplier (model shop) before carrying out any work on it.
The wing
Use the tip of a hot soldering iron to melt away the covering film over the servo
openings in the wing panels.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler
Order No. 7715
Order No. 2897.G35
Order No. 7648.3 or 7648.4
Order No. 1318.28.15 for 4
Order No. 1318.28.20 for 3
Order No. 7690.5
Order No. 197.6
Order No. 7690.4
Order No. 1385.42
Order No. 1587
e.g. Order No. 574.1,5
e.g. Order No. 574.2
e.g. Order No. 810
e.g. Order No. 5735.1,5
33
01/2008
Publicité
