Flash Exposure Compensation - Leica SF 58 Notice D'utilisation

Masquer les pouces Voir aussi pour SF 58:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74

Flash exposure compensation

In the case of major differences in brightness and/or distance between the subject
parts in the image field (especially between the main subject and the back-
ground), a manual flash exposure compensation may be advised to ensure the
correct exposure of your main subject. Explanation:
The TTL control of the cameras (excluding LEICA MP) as well as the automatic
flash exposure system of flash units is adjusted to a reflection factor of 25 %
(the average reflection factor of flash subjects). A dark background, which
absorbs too much light, or a bright background, which reflects strongly (e.g.
backlit shots) can lead to over or under exposure of the subject.
To counteract this effect, the flash exposure can be manually adjusted to the
photographic situation with a compensation value. On the LEICA SF 58, in the
TTL and automatic flash mode, manual compensation factors for the flash
exposure from -3 EV (f-stops) to +3 EV (f-stops) can be set in 1/3 step incre-
ments.
The level of the compensation value depends on the contrast between the sub-
ject and the image background:
Dark subject in front of a bright background:
Positive compensation value
Bright subject in front of a dark background:
Negative compensation value
Setting the function (see also "Menu navigation / setting the functions", p. 46)
1. In the exposure parameter menu
(EV= exposure value; f-stops) and
2. there the desired value.
Note:
When setting the flash exposure compensation, the range indication (2.5) on
the monitor of the flash unit can change (the more powerful illumination occur-
ring with a plus compensation can only be produced up to a shorter distance;
conversely, the weaker with a minus compensation also at a greater distance).
59
Set
, select the menu item "EV"

Publicité

Table des Matières
loading

Table des Matières