Basic Settings Menu - Leica SF 58 Notice D'utilisation

Basic settings menu

After calling the menu by pressing the
of basic settings available appears on the monitor, and the one activated is
identified by a black bar.
Simultaneously, the buttons change their function:
(1.13), (1.14): a. for selecting the basic settings in the list
(second step),
and
b. to select the desired function version within the
selected basic setting (fourth step).
Note:
Both the list of basic settings as well as the second function version with more
than two settings are not „endless loops", i.e. at the highest item only the
button can be used, at the lowest only
Set
(1.15): by pressing the first time:
Calling the list of the function versions of the respective basic
setting (third step)
by repeated pressing:
To confirm and activate the selected function versions (fifth
step)
At the same time, the display on the monitor returns to the pre-
vious step.
Menu
button 1 twice (first step), the list
.
(1.16): by pressing the first time:
To confirm and activate the selected function versions
(fifth step)
The display on the monitor returns to the previous step.
by repeated pressing:
Return to the starting position of the menu navigation and the
display on the monitor (sixth step)
In general, the following applies:
Irrespective of whether you have confirmed your particular settings as des-
cribed with a button, the menu navigation and the display on the monitor auto-
matically return to their starting position three seconds after your last entry. In
this case too, the last selected operating mode / setting is activated.
1 Pressing once switches on the monitor illumination (see p. 45).
47