Automatic / Manual Setting Of Flash Exposure Parameters - Leica SF 58 Notice D'utilisation

Automatic / manual setting of flash exposure
parameters
The settings listed in the parameter menu
the flash exposure. Depending on the flash mode set (see p. 56), a varying
number of the total of seven parameters will be displayed in this menu:
1 Sensitivity
2 Aperture
3 Focal length / reflector position
4 Manual flash exposure correction
5 Manual partial lighting
6 Stroboscopic-number of flashes
7 Stroboscopic-flash frequency
Details on the flash parameters 4-7 are available in the corresponding sections
on p. 59 (4), 62 (5), 61 (6) and (7).
Set
are decisive for the control of
M
TTL
TTL M
-HSS -HSS
A
ISO ISO ISO
F F F
A/M/Zoom A/M/Zoom A/M/Zoom
EV – –
– P P
– – N
– – f
Depending on the camera type, the flash parameters 1-3 are either set automa-
tically or they have to be entered manually on the flash unit:
ISO
(Sensitivity)
LEICA R 8 / R 9 Automatic
LEICA M 8 / M 8. Automatic
2
LEICA M 7 Automatic
LEICA M 6 TTL Automatic
LEICA MP Manuel
1 Only with R-lenses, equipped with ROM memory and contact strip.
2 Depending on features of the lens
3 Only with M-lenses equipped with 6-bit coding.
54
Aperture
(controlled automatically by the camera
or preset manually on the lens)
Automatic 1
Manuel
Manuel
Manuel
Manuel
Focal
length
Automatic 1,2
Automatic 3
Manuel
Manuel
Manuel