Sonnenkonig SECCO 200 Manuel De L'utilisateur page 62

1. Power indicator light
The power indicator light will light up in green when the unit is plugged in, regardless of
whether the unit is operating or not.
2. Water full indicator light
The water full indicator light will turn on in red when the drainage tank is full. if the
light is on, empty the water from the drainage tank and make sure the tank is properly
positioned again.
3. Swing Indicator Light
When the swing indicator light turns on, the louver will swing.
GB
4. Timer indicator light
The timer indicator light will turn on in green when you have programmed the times for
the unit to turn on and turn off automatically.
5. Setting indicator light
The setting indicator light will light up in green when you are setting the humidity level.
6. High indicator light
The high indicator light will light up in green when you program the unit to run the fan
at high speed.
7. Low indicator light
The low indicator light will light up in red when you program the unit to run the fan at
low speed.
8. ION indicator light (optional)
The green LED light will turn on when the ionic function is turned on.
9. UV iIndicator light (Optional)
Il led è blu quando si imposta la funzione UV.
Humidity Level, Timer, Digit display
The digit indicator features three functions:
1. When the unit is plugged in, it will indicate the room humidity level.
2. When you set the humidity level, it will indicate the humidity level you have selected.
3. When you program the time for the unit to turn on and off, it will show the time.
4. When the room humidity is lower than 35%, it will show "LO".
5. When the room humidity is higher than 95%, it will show "HI".
62