Glass; Glass Cleaning; Glass Replacement - England's Stove Works 25-CAB80 Manuel D'installation

Glass
This unit has one ceramic glass panel (Part # AC‐G9) in the door; self adhesive window gasket is included
with replacement windows purchased directly from England's Stove Works. Never replace ceramic glass
with tempered or any other type of glass and never operate this unit with cracked or broken glass. Surface
scratches are acceptable and normal, but if this glass becomes cracked in any area, the unit should be shut
down and the glass replaced with this high‐temperature ceramic glass.
Ceramic Glass Specifications

Glass Size: 9.125 in. (231.78 mm) x 9.125 in. (231.78 mm)

Glass Type: 5mm Ceramic Glass
Glass Precautions
 Never replace ceramic glass with tempered or any other type of glass.
 Never operate this unit with cracked or broken glass.
 Do not slam the door or strike the glass with any objects.
Glass Cleaning
1. Be certain the stove if Off, and the stove and the glass are completely cool.
2. The build‐up on the glass will generally be light and water is normally sufficient to remove the deposits.
If stubborn soot persists, use a cleaner made specifically for this purpose. Do not scrape the glass or
use abrasive cleaners.
3. Rinse the glass with clean water and dry the glass before resuming normal operation.
Glass Replacement
1.
Remove the door from the stove and rest it face‐down on a firm work surface.
2.
Remove the door gasket using a pair of pliers to pull it out of the channel.
3.
5
Using a / " wrench, remove the (4) screws that hold the glass tabs in place on the door.
16
4.
Lift the old glass panel out and discard (be especially careful if the old glass is broken or cracked).
5.
The new glass panel must be wrapped with a self‐adhesive fiberglass tape gasket (Part # AC‐GGK). This gasket
serves to cushion the glass from the steel door and brackets.
6.
Reinstall the glass tabs using the screws previously removed. Do not over‐tighten the screws.
7.
Install the new door gasket (Part# AC‐DGKHD) using the provided high temperature adhesive.
8.
Hang the door back on the stove and close tightly and allow 24 hours for adhesive to cure.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING THE UNIT AS SPECIFIED, AND
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO UNSAFE INSTALLATION OR
REPLACING COMPONENTS
(includes Door Gasket replacement instructions)
*See diagram on page 56 for door assembly.*
REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
50