Reboot The Headphones - Bose NOISE CANCELLING HEADPHONES 700 Mode D'emploi
Masquer les pouces
Voir aussi pour NOISE CANCELLING HEADPHONES 700:
- Mode d'emploi (60 pages) ,
- Manuel d'utilisation (61 pages) ,
- Manuel d'instructions (28 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
REBOOT THE HEADPHONES
If the headphones are unresponsive, you can reboot them. Rebooting the headphones
doesn't clear settings or connected devices.
NOTE: Do not connect the USB cable to the headphones until instructed to do so.
1. Disconnect all cables from the headphones.
2. Connect one end of the USB cable to a USB-A wall charger or computer that is
powered on.
3. Press and hold the Power/Bluetooth button while connecting the small end of the
USB cable into the USB-C port on the right earcup.
4. Release the Power/Bluetooth button after 2 seconds.
NOTE: You may need to reboot your headphones twice.
TR OUBL ES H O OTI N G
|
5 1
E N G
Publicité
Chapitres
Table des Matières
Dépannage
