Customer Service And Spare Parts; Installation; Door Reversibility - BORETTI BRA88 Mode D'emploi

GB
Customer service and spare
parts
If you cannot find the remedy for a
malfunction in
instructions, please contact your dealer
or our customer service department and
consult the Guarantee card.
Selective ordering of replacement parts
can save unnecessary travel and costs.
For this reason always provide the
following appliance information:
Model Name
Model Number (PNC)
Serial Number (S-No.)
This information can be found on the
rating plate inside the cabenit on the left
hand wall. We recommend that you enter
this information here, so that it is handy if
needed.
Technical specifications
The technical data is indicated in the
rating plate on the left side inside the
appliance.

Door reversibility

The equipment is supplied with
the door opening toward the
right.
Follow the instructions below before
installing it to have the door open to
the left.
1. Unscrew the top hinge screw and
remove the spacer.
2. Remove the door.
3. Unscrew with a key the lower pin and
replace it on the opposite side.
4. Reinsert the door and screw the upper
hinge and spacer onto the opposite
side.
58
these operating

Installation

Take utmost care when handling
your appliance so as not to
cause any damages to the cooling
unit with consequent possible fluid
leakages.
During normal
condenser and compressor at the
back of the appliance heat up
considerably. Always ensure that there
is adequate ventilation as a failure to
do this will result in component failure
and possible
installation instructions.
Important: if the supply cord is
damaged, it must be replaced by a
special cord or assembly available
from the manufacturer or its service
agent.
operation, the
food loss. See