BORETTI BRA88 Mode D'emploi page 62

GB
6. Place guide (Ha) on the inside part
of the furniture door, up and down
as shown in the figure and mark
the position of external holes. After
having drilled holes, fix the guide
with the screws supplied.
7. Fix cover (Hc) on guide (Ha) until it
clips into place.
62
8. Open the appliance door and the
furniture door at 90°. Insert the
small square (Hb) into guide (Ha).
Put together the appliance door and
the furniture door and mark the
holes as indicated in the figure.
9. Remove the squares and mark a
distance of 8 mm from the outer
edge of the door where the nail
must be fitted (K).