Building-In - BORETTI BRA88 Mode D'emploi

GB
Attention!
It must be possible to disconnect the
appliance from the mains power supply;
the plug must therefore be easily
accessible after installation.

Building-in

Dimensions of the recess
Height of housing (1)
880
Depth of housing (2)
550
Width of housing (3)
560
It is necessary that the niche is
provided with a conduct of ventilation
having the following dimensions:
Depth 50 mm
Width 540 mm
60
1225 mm
550 mm
560 mm
For appropriate venting, follow
indications in the figure.
1. Fit the appliance in the niche by
making sure that it stands against
the interior surface of the unit on the
side where the door hinges of the
appliances are fitted. Insert the
appliance until the upper strip butts
up against the unit (1) and make sure
that the lower hinge is in line with the
surface of the unit (2).