The Bypass Valve; Precautions And Storage - Procopi Victor Manuel D'installation Et D'utilisation

STEP 7: PRECAUTIONS AND STORAGE
NOTES :
1. CAUTION VICTOR is not a toy. Remove it from
the pool while the pool is in use.
2. If the automatic cleaner needs to be stored out of
the pool. Separate the hose sections such that they
may be stored straight. Never roll up the hose, this
will impose a form on it that will interfere with the
correct operation of the VICTOR.

THE BYPASS VALVE

The patented bypass valve is very useful for smooth operation of VICTOR.
It comes as standard with all 4 x4 models and is available as option for 2-wheel models.
Its purpose is to provide VICTOR with a constant flow despite filtration variations and thus
ensure that VICTOR runs smoothly at 11-13 wheel rotations per minute.
do not remove it. VICTOR could move too quickly to the detriment of its efficiency
and the service life of its moving parts.
In the event that the vacuum point (or skimmer) flow rate is
too high, the bypass valve opens to absorb the superfluous
flow that would interfere with VICTOR's operation.
On the other hand, in the event that the flow rate it too low
(obstruction in the hose or in VICTOR), the bypass valve
opens fully allowing all water to flow through thus avoiding
damage to the pump and obliging the user to correct the
problem.
Caution: If VICTOR has been set-up with a bypass valve,
26/56
Correct
Incorrect