Verification Of Components; Installing Victor; Preparing The Pool - Procopi Victor Manuel D'installation Et D'utilisation

VERIFICATION OF THE COMPONENTS
Before proceeding with installation of the VICTOR, check that you have the following components:
1 VICTOR
1 bypass valve
(VICTOR 4x4
only)

INSTALLING VICTOR

VICTOR comes completely pre-assembled. The entire system can be installed in just a few minutes with
out any tools. Once installed, VICTOR is ready to run silently and efficiently.
STEP 1: PREPARING THE POOL
a. Manually vacuum the pool and remove all
large debris.
b. Thoroughly clean your pool filter, the pump
basket and the skimmer basket.
c. Point the pool return fittings downwards.
or 1 VICTOR 4x4
1 Hose cone
Hose kit:
- 1 hose section with a white sleeve and pre-
assembled float
- 6 (Victor, 2 wheel) or 11 (Victor 4x4) hose
sections
2008/05- Indice de révision : B - code : 0030010
23/56
Return fittings
pointed downwards