About Victor - Procopi Victor Manuel D'installation Et D'utilisation

ABOUT VICTOR

VICTOR is a 'suction-side cleaner' that utilises your
existing pump and filter for power and cleaning. The
bottom of VICTOR is designed to work very much like
your vacuum cleaner. It has a wide vacuum path (created
by it's mini-skirts) and a central suction port that is
specifically sized to create maximum suction velocity to
pick up leaves and other debris without clogging.
The VICTOR is a remarkable automatic pool cleaner with
a host of patented features designed to optimise pool
cleaning and eliminate problems. Here are some of the
unique features and how they work for you :
Programs (tracking cam) :
causing the VICTOR
different turning radii are programmed into the 'tracking
cam' thus ensuring complete pool coverage even with
unusual shapes, uneven surfaces and steep drop-offs.
While some automatic pool cleaners tend to stay in the
deep end, VICTOR spends an equal amount of time on
every area of the pool. Its 'auto-tracking' function also
prevents it from getting stuck in corners, on the main
drain or on any other obstacle.
Turbine drive with "folding vanes" :
hub. The turbine hub is connected to the gears, drive
shaft and wheels. Therefore, when the turbine hub turns,
the wheels turn and VICTOR tracks.
The self-adjusting turbine optimises through put of water
and debris. As each turbine vane moves, pushed by the
VICTOR
programmed
clean your pool.
This
accomplished with
a 'tracking cam' that
periodically causes
the left-hand
wheel(s) to rotate
backwards thereby
to change direction. Several
Water passing
through the "turbine
chamber" pushes
against the turbine
vanes (in the same
way that water in a
river pushes
blade on
paddlewheel) and
turns the turbine
water, the vane folds against the turbine hub, thus
eliminating any resistance as it continues to turn through
the water. As a result, the turbine drive in the VICTOR is
very efficient allowing the VICTOR to move with a flow-
rate pump.
Finally, the dirt and debris collected by VICTOR only
pass though the
enclosed. This unique feature keeps dirt and debris out
of the gear, drive shaft and "tracking cam", significantly
enhancing the service life of these components.
Patented tread design with "Tread claw":
VICTOR is easily
recognisable with
its colourful wheels
and unique tread
design. All front
is
tyres have three
to
raised treads called
the "Tread claw".
is
Upon encountering
the main drain, or
some other uneven surface, VICTOR literally "claws" its
way over the obstacle and then continues on its way.
Tread wear indicators have been incorporated into the
sides of the tyres. When the tread has worn down to the
bottom of the tread wear indicator it's time to replace your
tyres.
Patented Multiple "Mini-Skis" design:
example, if VICTOR encounters on object the size of a
pebble only one mini-skirt will lift to capture the object
while the others maintain optimum suction across the
rest of the vacuum surface.
a
a
If VICTOR is on an uneven surface or crosses a
curved surface at an angle (transition between pool
floor and pool wall), the mini-skirts will follow the
contours of the pool and continue to vacuum.
2008/05- Indice de révision : B - code : 0030010
21/56
"turbine chamber" that is totally
The
(4 at the front and
4 at the back) form
the critical vacuum
surface
vacuum
head) , however,
they
independently of
each other.
"mini-skis"
(like a
cleaner
work
For