SPIDO SPRING 1300AUTO Notice D'utilisation page 28

[Getting started]
Security instruction for your safety and the
good use of the pump
This equipment is suitable neither for drinking water nor for equipment in
contact with dishes.
Unplug the equipment from the mains before any intervention.
When the pump is running, there must be no particles in the water (clean
water only).
Make sure that air can circulate easily around the pump, in order to ensure
its cooling, and make sure there is no risk of condensing
Do not use the pump without a residual-current device (30mA)
Do not use the pump if safety devices are damaged or used. Never
deactivate safety devices.
The pump must be used with 220-240 V AC current,as indicated on the
rating plate.
Do not use the power cable for carrying the pump or for unplugging.
Make sure that electric connections are not in the spraying area, and that
they are protected from humidity.
Avoid dry-running of the pump. Never use the pump if suction hose is
obstructed. Use a device for lack of water detection
It is strictly forbidden to pump corrosive, easily combustible, aggressive or
explosive liquids (such as gasoline, petroleum or nitro thinner), saltwater and
food.
IMPORTANT: For your safety, read the instructions. The temperature of the
liquid must not exceed 35°C.
IMPORTANT : For your safety, read the
instructions
7