Getting Started - SPIDO SPRING 1300AUTO Notice D'utilisation

[Getting started]

Getting started
ELECTRIC SHOCK:
Before filling the pump, unplug the equipment from the mains
1. Remove filter cap with the
spanner
2. Put PTFE on connectors'
threads
3. Fill the pump with water
slowly, until water comes out of
the suction hole (2-3 liters), then
replace the filter cap.
Fill the suction hose with water
4. Connect suction hose and
delivery hose. Then, plug the
pump to the mains.
5. During the suction process, make sure that nothing is blocking the air
escape from the delivery hose
5