Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. MANAGEMENT OF STORED DATA
5.1. HOW TO SAVE A MEASUREMENT
After taking a measurement
1.
press SAVE key, the instrument
displays a screen similar to the
one beside
Should you need to modify the values of the parameters L and P press the
2.
arrow keys , and select L or P, then pressing the arrow keys , set
the desired value (from 1 to 255). These values can enable you to trace back
the place where the measurement was effected
OR
3.
5.2. HOW TO CANCEL ONE OR SEVERAL MEASUREMENTS
Press RCL key, the instrument
1.
displays a screen similar to the
one beside
Press the arrow keys , to
2.
select
where cancellation of data is to
be started , the displays a
screen similar to the one beside
Confirming cancellation of data causes removal of all stored data starting from
the selected location till the last memory location
Confirm measurement storing pressing SAVE key or ENTER
key
the memory location
EN - 17
CAUTION
GEO416 - GEO416GS
No. of memory location
where the measurement
has to be saved
Last
value
set
parameters L and P
Number of the last memory
location used
Values
of
L
and
parameters
Number of the memory
location where cancellation
is to be started
Values
of
L
and
parameters
for
P
P
Publicité
Chapitres
Table des Matières
