Bresser 4Cast CS Mode D'emploi page 31

ACTIVATION OF FAVORITES
Once you have set your city as described above, you can save even more cities for facilitated
access. Rather than terminate the entry with the [SET] button, you can proceed as follows:
• If 'Frankfurt am Main' is your selection as one of your favourite cities, then press [ TEST √ ] to
confi rm. A √ will be shown on top of your selected city, and it will be stored into your personal
memory list.
• Then, you are able to press [ ▲ ] or [ ▼ ] to select more cities in the same country, and then
press [ TEST √ ] to confi rm. You may select maximum FIVE cities to display. If you want to add
more cities, then [MEMFULL] will be shown in the information window.
OR
Press [ SET ] key to quit, and EXIT will be shown at the information window.
REMARK: If after inserting the batteries for the fi rst time, you are skipping the city selection, the
product will select by default "Frankfurt am Main" as your selected city.
DISPLAY OF FAVOURITES
If you have selected more than one city. Let's say you have select "Frankfurt am Main", Köln
and Münster in your desired city list, then you are able to press [ ▼ ] key when the information
window shows the CITY NAME (Press [SET] until it displays the City Name).
REMOVE YOUR SELECTED CITY/ CITIES OUT OF MEMORY LIST
TO GET INTO THE SETTING AS DESCRIBED BELOW, THE CURRENT DAY MUST BE DISPLAYED
ON THE FORECAST WINDOW.
• Press and hold [ SET ] for 3 seconds, „COUNTRY" is shown in the information window, then
press
[ ▲ ] or [ ▼ ] key to select the country. For example, you had selected the country name such
as
„D/GER" means Germany.
• Press [ SET ] key to confi rm the country. (let's say we select Germany right now), and then the
information window will show „CITY".
• Then, press [ ▲ ] or [ ▼ ] to go to your selected city, let's say 'Frankfurt am Main', and
the „FRANKFURT.M" will show in the information window.
• Press [ TEST √ ] to remove the √, and this city is successful remove out of your list of
preference cities you had selected.
• Repeat this if you wish to remove more cities from your list
• Then, you are able to press [ ▲ ] or [ ▼ ] key to select more cities, and then press [ TEST √] to
remove your selected cities.
• Press [ SET ] key to quit, and EXIT will shown at the information window. After 4 seconds, it will
go to the City-Date-Time Mode.
31
GB/IE