Using The Device - SKYLOTEC MILAN Mode D'emploi

SKYLOTEC - High Protection. Best Performance.
should be chosen in the way that the rope is not touching any sharp edges or items
nor running along rough wall surfaces. If there is no sufficient distance between rope and wall, a
suitable rope guard has to be used. The device is fixed only at the suspension eye. If the device is
GB
equipped with a fixing adapter, this adapter is only a help support and connected to the device by
a rated break point. (Additional fixation at an anchor point is obligatory!)
The use of adapters and accessories, which are not original SKYLOTEC-
accessory, is not allowed.

4. USING THE DEVICE

During the rescue operation it is to be assured that all persons are protected against fall
from height!
In any case there is to be a safe connection between suspension eye and anchor point.
This can be achieved by using
lanyards according EN 354
•
positioning ropes according EN 358
•
connecting elements (carabiner) according to EN 362 or
•
slopes and anchor devices according EN 795.
•
For use in North America the equipment has to be according ANSI/ASSE Z359.1
(or Z359.4).
EN 360
30
EN 341 EN 354/355 EN 353-2