Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8893539
5.
After making adjustments, make sure that any adjustment devices are
securely tightened.
6.
Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. If your tool runs
smoothly under no load, but does not run smoothly under load, then
excessive pressure is being used.
7.
Do not touch an operating motor. Motors can operate at high temperatures
and can cause a burn injury.
8.
Only use accessories that are specifically designed for use with the tool.
Ensure the accessory is tightly installed.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
IDENTIFICATION KEY
A
Beam
B
Log Guard
C
Wedge
D
Control Valve
E
Log Guide
F
Lock Assembly
G
Main Body
H
Wheel
I
Hydraulic Cylinder
J
Handle
K
Engine Assembly
8
12 Ton 3-Position Log Splitter
For technical questions call 1-800-665-8685
V4.0
Fig. 1
Publicité
Table des Matières
