EUROM Golden 2000 Amber Smart Rotary Manuel D'utilisation page 29

To install, secure the suspension bracket (9) to the radiator by unscrewing both of
the Allen bolts (A), place the bracket with the long side against the rotary motor
and screw the bracket with the two Allen bolts tightly to the terrace radiator, see
fig.
Carefully choose the right place to install your heater.
Before fastening, check that the minimum safe distances between the surroundings
and the chosen location are respected:
Minimum distance lowest point of heater – floor: 1,8 metres
Minimum distance heater – heated object: 1 metre
Minimum distance top* heater – fire-resistant ceiling: 0.2 metres
Minimum distance top* heater – tent tarpaulin, parasol etc.: 0.5 metres
Minimum distance side heater – walls, obstacles, objects: 0.5 metres
* The top of the heater is the side where the suspension bracket is attached.
If you suspend the device outside, ensure that it is protected from the wind.
The appliance has to be mounted preferably on an incombustible foundation. That
foundation has to be vibrationfree, exact vertical and stable enough for lastingly
holding the appliance free of problems. Check or the provided dowels and screws
are suitable, strong enough and qualified for the foundation. The material provided
is identified for a brick wall; for another foundation please ask the specialist for
suitable material.
 Fix the mounting bracket totally horizontal on the wall with the four anchor
dowels provided see fig.
 Hang the terrace heater with the suspension bracket in the wall bracket. Slide
the bracket through the wall bracket as far as
possible – the small hole in the bracket protrudes
under the wall bracket. Secure that terrace heater
by screwing the short wing nut supplied as far as
possible into the small hole in the suspension
bracket.
 However you install the Golden Amber Smart
Rotary, always lead the electrical cable directly
away from the heater. It may not become hot!
29